Cómo ver información de las LUNs de la SAN

Introducción
Si queremos obtener información de las LUNs que vemos a través de nuestras HBA, utilizaremos el comando luxadm con la opción probe, y para obtener un detalle la opción display {raw_device}, por ejemplo,

# luxadm probe
No Network Array enclosures found in /dev/es

Found Fibre Channel device(s):
Node WWN:200600a0b82af68e Device Type:Disk device
Logical Path:/dev/rdsk/c5t600A0B80002AF6180000050E4A125DF2d0s2
Node WWN:20000004cf7fe30e Device Type:Disk device
Logical Path:/dev/rdsk/c5t20000004CF7FE30Ed0s2
Node WWN:20000004cf8f7b64 Device Type:Disk device
Logical Path:/dev/rdsk/c5t20000004CF8F7B64d0s2

Y para ver la información de la LUN utilizaremos la opción display

# luxadm display /dev/rdsk/c5t600A0B80002AF6180000050E4A125DF2d0s2
DEVICE PROPERTIES for disk: /dev/rdsk/c5t600A0B80002AF6180000050E4A125DF2d0s2
Vendor: IBM
Product ID: 1814 FAStT
Revision: 0916
Serial Num: SN74905575
Unformatted capacity: 204800,000 MBytes
Write Cache: Enabled
Read Cache: Enabled
Minimum prefetch: 0x1
Maximum prefetch: 0x0
Device Type: Disk device
Path(s):

/dev/rdsk/c5t600A0B80002AF6180000050E4A125DF2d0s2
/devices/scsi_vhci/ssd@g600a0b80002af68e000007324a70f30e:c,raw
Controller /devices/pci@8,600000/pci@1/lpfc@5/fp@0,0
Device Address 200700a0b82af68f,5
Host controller port WWN 10000000c92d4459
Class secondary
State STANDBY
Controller /devices/pci@8,600000/pci@1/lpfc@5/fp@0,0
Device Address 200600a0b82af68f,5
Host controller port WWN 10000000c92d4459
Class primary
State ONLINE
Controller /devices/pci@8,600000/pci@1/lpfc@4/fp@0,0
Device Address 200700a0b82af68f,5
Host controller port WWN 10000000c92d4458
Class secondary
State STANDBY
Controller /devices/pci@8,600000/pci@1/lpfc@4/fp@0,0
Device Address 200600a0b82af68f,5
Host controller port WWN 10000000c92d4458
Class primary
State ONLINE

Referencias

• Comando básicos de Solaris, y no tan básicos